Call 0161 339 8901
Spiral Tube & Fittings
Spiral galvanised ductwork & fittings in a large range of sizes.
Our ductwork complies to DW144 standard. The UK recognised specification of how to manufacture and install ductwork. Spiral ducting is made for transporting air - it supplies fresh air into buildings and extracts excess/stale air out of buildings. Spiral duct is much more effective in terms of less air leaks then rectangular ducting due to less joints because of its large 3m lengths. Spiral ducting can be used to carry air up to temperatures of around 200â—¦c at a continual temperature and around 250â—¦c if the temperature is intermittent. If used above recommended temperatures, discolouring can happen and corrosion can occur.
We can offer advice over the phone or email. Other products not listed are also available so please enquire via email orders@alphatube.co.uk
30° Bends
30-degree bend made from galvanised steel with male ends for connection to spiral ducting and flexible tube. Available in sizes from 63mm to 710mm. Larger sizes available on request. Please note some uncommon sizes may have longer lead times. Full specification details below.
£0.00
Spiral Tubing x 1.5mtr
High-quality spirally wound ducting made from durable galvanised steel, cut to standard 1.5 metre lengths. Ducts are manufactured to female sizing, designed to accept male fittings for easy installation.
Available in diameters from 63mm to 710mm
Larger sizes available on request via phone or email
3 metre lengths available for in-store pickup
Please note: Some uncommon sizes may have extended lead times.
✅ Download Data Sheet
£0.00
90° Bends
90° bend designed for use with spiral tubing, manufactured from robust galvanised steel. Supplied with male ends for straightforward connection to spiral ducting or flexible tubing. Standard sizes range from 63 mm to 710 mm, with larger dimensions available on request via telephone or email.
Please note: Certain less common sizes may carry a longer lead time.
Data Sheets
£0.00
45° Bends
45-degree bends to suit spiral tubing, made from galvanized steel. Male ends to fit in spiral ducting or flexible tube. Available in sizes ranging from 63mm – 710mm. Bigger sizes available by phone or email enquiries.
*Please note* some of the more uncommon sizes may have a larger lead time.
£0.00
Male Collar
Male collar made from galvanised steel. These collars are made to join lengths of spiral tube together or other female fittings. Available in sizes ranging from 63mm – 630mm. Bigger sizes available by phone or email enquiries.
*Please note* some of the more uncommon sizes may have a larger lead time
£0.00
Female Collar
Female collar made from galvanised steel. These collars are made to join male fittings together such as bends or tees. Available in sizes ranging from 63mm – 630mm. Bigger sizes available by phone or email enquiries.
*Please note* some of the more uncommon sizes may have a larger lead time.
£0.00