Control Dampers, Fire Dampers & Fans

Volume Control Damper made from galvanised steel. The dampers have male ends to fit inside ducting or other female fittings. They are used for manually balancing the flow of the air in ducting runs with a single circular blade. Bigger sizes available by phone or email enquiries.

*Please note* some of the more uncommon sizes may have a larger lead time.

Data Sheets

TOSHIBA Air-to-Air Heat Exchanger uses exhaust air to pre-condition incoming air to reduce cooling or heating demand and overall size of the air conditioning system. This improves the energy efficiency of the building and can also help to comply with buildings regulations.

• This style of unit comes in 4 differnt models - 151,251,351 & 501  
• Units come with built in spigots: 2 x 100mm to 2 x 200mm
• Fresh air ventilation

DATA SHEET

The TCBBx2/4-500 is a single-phase, contra-rotating cased axial fan from Soler & Palau, designed for high-pressure ventilation applications such as commercial kitchens, ducted systems, and industrial exhausts. Its dual impeller design enhances pressure performance while maintaining compact dimensions.

The TCBBx2/4-450 is a single-phase, contra-rotating cased axial fan from Soler & Palau, designed for high-pressure ventilation applications such as commercial kitchens, ducted systems, and industrial exhausts. Its dual impeller design enhances pressure performance while maintaining compact dimensions.

Circular single blade externally resettable fire dampers for prevention of fire spreading in ventilation ductwork with a fusible thermal link that triggers at 72 degrees C. The damper has a mounting plate so it can be fitted to surfaces and act as a closing gate in between walls in buildings. Mainly manufactured from hot galvanized steel sheet.

Download Specification Sheet

Curved access doors to suit circular ductwork. Used to access the insides of the ducting to reset fire dampers or to clean. A sandwich type effect that clamps the opening with a gasket seal by wheel knobs.

Circular volume control dampers with multiple blades are used where there is no need for a high level of shut off. Manufactured from galvanised steel. External manual handle with several control settings. Male connections to fit inside spiral ducting. Square and rectangular multi-blade dampers also available - please enquire.

• Diagonal impeller with downstream three-dimensional guide vanes
• Galvanized metal housing
• Speed controllable
• Integrated thermostatic switch
• Includes mounting bracket

Data Sheets

250 fan sizes

315 fan sizes

 The HCBB/4-400/H-A is a plate-mounted axial flow fan from Soler & Palau, designed for industrial and HVAC applications requiring high airflow and durability.

Used regulary too bring supply air into kitchen's & factorys.

Below are its key technical specifications:

• Model: HCBB/4-400/H-A

• Motor Type: Single-phase, 4-pole asynchronous squirrel-cage motor

• Voltage: 230V, 50Hz

• Power Consumption: 315 W

• Current Draw: 1.5 A

• Speed: 1360 RPM

• Airflow Capacity: Up to 4,830 m³/h

• Sound Level: 62 dB(A)

• Operating Temperature Range: -40°C to +70°C

• Protection Rating: IP65

• Insulation Class: Class F

• Weight: Approximately 9 kg